Your jobs

Open a room survey or start a new one.

Start here · capture and check dimensions

Keep the phone and laser rigidly mounted. Use the same browser and Rooms address where your jobs are saved.
Open a room, then Shoot. Connect the laser, turn on Camera, and check that orientation responds as you turn the mount.
Before the first reading at a station, press Set zero. Under Job → Setup, enter the height of the laser's measurement reference above the floor. Match the laser's front/back reference to your rig; check it against a known distance.
Shoot at least three spread-out points on one wall, then Next wall. Work around the room in order. Do not move the tripod between wall shots.
Measure floor and ceiling points. For a door or window, choose Opening, select its wall and shoot every corner. For electrical/plumbing, choose Detail, select its wall and shoot the centre; shoot corners only when you need a size.
Moved the tripod or need a new zero? Start a new station and align it by remeasuring two well-separated, previously saved points.
Check Drawing and Sheets. Dimensions are in millimetres on sheets. START marks the left end of each elevation; AFF means height above the floor reference. Swipe a sheet sideways to inspect its dimensions.
Export → Room survey PDF or CAD DXF. Back up all jobs + photos from Jobs. Do not clear browser data to refresh.

Before relying on a room: compare several wall widths, a diagonal and an opening against independent measurements, then repeat a saved point. Phone angle error can affect the drawing even when the laser distance is accurate.

Your work on this device

Opening saved jobs…

Refresh here without clearing saved jobs or photos.

Missing work? Check this device

A backup is a file you keep outside this app. Browser storage protection is best effort; it cannot recover data already removed.

Your account

Sign in to find your cloud jobs. Saved local jobs open without signing in.

Not signed in

Cloud access is checked separately from sign-in. If your account has no active Rooms Cloud plan, the app will say so. Your jobs and exports remain accessible.

Job

Job name

Address

Client

Job no.

Notes

Rooms · status

All jobs

Your name / initials

Account

Camera off

Wall 1 · 0 shots

no zero

Last shot

—

az —
el —

Shoot 3 spots on wall 1, spread out.

Shots · 0

No walls yet

Floor—

Height—

Closure—

Tap a door in two rooms to glue them

Rooms on this level

Room sheets

Export is for files.

Files · this room

Include locally available photos in PDF

Level

Job link

Open on another phone

Sign in under Setup to use job links

Import

Import job JSON

Restores a job exported from another phone

›

Setup & calibration

1

Disto reference point

In the disto's own settings, set the measuring reference to the tripod thread. Then the pan axis and the measurement origin are the same point.

2

Set level — once per mount

Level the rig on the tripod using the disto's bubble screen, then tap. The app records how the phone sits when the laser is flat.

not set

3

Where the dot lands — once per mount

Shoot a plain wall from about 2 m, then tap the red dot in the frame. Repeat from about 5 m.

Take a shot with the camera on, then tap the dot here

not set

4

Fire the disto from the phone

If you found the trigger bytes for FFB1, paste them as hex. Leave blank to use MEAS on the disto.

Advanced server settings

Changing server does not move existing jobs. Back up your work first.

6

Units & height

Room photos